Rechargeable E-Collar Electric Shock Remote Control Dog Training Anti-Bark Rechargeable E-Collar Electric Shock Remote Control Dog Training Anti-Bark Rechargeable E-Collar Electric Shock Remote Control Dog Training Anti-Bark Kit! - AB (4 ratings) £19.99 Quantity: at £19.99 each Add To Basket 100% Brand-new and High Quality. 100 levels of vibration, 100 levels of static. The levels can be altered by pressing up & down button. The collar is Slight Waterproof, in order to extend product’s life, avoid Heavy Rain or Deep-water Immersion! Frequency : 433.825MHz LCD display, clear & easy to read. Built-in Rechargeable 3.7V 500mAh lithium battery for the Transmitter. Built-in Rechargeable lithium battery for the collar. The Collar Receiver will TURN OFF if it is unused for 4 mins. Any movement will activate it into STANDBY MODE. The Transmitter will go into STAN BY MODE if there is no operation after 20 seconds and turn off after 2 mins. How to Connect the Transmitter with the Collar Receiver? Turn on the remote control and the collar. There will be “000” on the screen of the remote. Please press the buttons on the side of remote. When the “000” changes to any digital between 1 to 99, then choose 1 or 2 channel to encode. Turn over the Reset part of the Rubber cover in the Collar Receiver. Use a Pin to press the Reset Button inside the Collar Receiver to turn it on (hold the button for 4 seconds to turn off). When you hear a beep from the Collar Receiver, Press the “Y” button(Launch button) within 30 seconds. Lastly, The Collar Receiver beeps, it means that the Transmitter has encoded the collar Receiver.